Aftermarket KUTAI GCU-10 Automatic Controller for Generator Control Unit
Replace Part Number:GCU-10, GCU10
Description:The GCU-10 is an economical genset controller, giving high reliability for much less than similar controllers. It has adjustable settings to enable it to work with any type of generating set and comply with different engine conditions and protections. Optional 12V/24V relay boards (GCU-11R) are available for simplifying wiring and connections.
Feature:Microprocessor Based DesignUniversal LED Graphic Interface, Displays Generator Status and FailuresModular Design, Quick InstallationProgrammable Engine & Generator Controls Adapts Easily To Any Type Generator Set.Waterproof Front Panel With UV ProtectionProvide IDLE control For Elec. GovernorsFive Adjustable Time Delay PotentiometersFive DIP Switches For Specification Setting
Specification:DC Supply:9.0 to 36 VDCAlternator Input Range:Voltage 5~300 VDC Frequency 50~60 HzFuel Solenoid Signal Output:5 Amp @ 12/24 VDCStart Signal Output:5 Amp @ 12/24 VDCWarm up Signal Output:5 Amp @ 12/24 VDCAccessory " ON " Output:5 Amp @ 12/24 VDCIdle Control Conductor Capacity:5 Amp @ 12/24 VDCPower Consumption:Under 3 VA on AutoAdjustable Timers:Engine Pre-Heat : 2~30 sec.Starter Cranking Time : 1~15 sec.Energize to STOP : 1~15 sec.Engine Idle (Governor) : 0~300 sec.Engine Cool-down : 0~300 sec.Environment:Operation Temperature : -20~70 ??CRelative Humidity : Maximum 90%Protection & Alarm Status Indicators:Start FailureHigh Water TemperatureLow Oil PressureOverspeedUnderspeedEmergency StopExtra Prog. InputLow Battery VoltagePanel Installation Cut-Out:66.0 x 66.0 ??0.5 mmDimensions:72.0 (L) x 72.0 (W) x 50.0 (H) mm
Reviews
There are no reviews yet.