Air conditioning
Damping
Brakes
Body
Interior
Electrics
Engine
Steering
Air conditioning
Damping
Brakes
Body
Interior
Air conditioning
Interior
Body
Brakes
Damping
Up to 40% Off
TOOLS YOU NEED
Good Values. Always.
Air conditioning
Damping
Brakes
Body
Interior
Electrics
Engine
Steering
Air conditioning
Damping
Brakes
Body
Interior
Electrics
Engine
Steering
Air conditioning
Damping
Brakes
Body
Interior
Electrics
Engine
Steering
Air conditioning
Damping
Brakes
Body
Interior
Electrics
Engine
Steering
Aftermarket Deep Sea DSE7220 7220 Electronic Controller Control Module Panel
SKU: ELFP0497
$243.00
Add to wishlistProduct information
| Brand: | Zonparts |
|---|---|
| Compatible Model Brand: | For OTHER BRAND |
| Model Number: | |
| Replacement Part Number: | DSE7220 |
| Compatible Engine Brand: | |
| Engine Number: |
Description
- Aftermarket Deep Sea DSE7220 7220 Electronic Controller Control Module Panel
- See Details:Operating Voltage: DC 8.0V to 35.0V,ContinuousPower Supply: Power Consumption<3W(standby:??2W)Alternator Input Range: 15V - 360 V AC (ph-N)3-Phase4-Wire: 26V - 620 V AC (ph-ph)3-Phase3-Wire: 15V - 360 V AC (ph-N)Single-phase2-wire: 15V - 360 V AC (ph-N)Alternator Frequency: 50/60HzSpeed Sensor voltage: VPP2.2 - 100Vpp (Peak to peak)Speed Sensor Frequency: 10000Hz (max)Start Relay Output: 16Amp Controller Power Voltage OutputFuel Relay Output: 16Amp Controller Power Voltage OutputProgrammable Relay Output: 17Amp? 250VAC Voltage Free OutputProgrammable Relay Output: 27Amp? 250VAC Voltage Free OutputProgrammable Relay Output: 316Amp? 250VAC Voltage Free OutputProgrammable Relay Output: 416Amp? 250VAC Voltage Free OutputCase Dimension: 210mm x 152 mm x 48 mmPanel Cutout: 186mm x 141mmC.T. Secondary: 5A RatedWorking ConditionsTemperature: (-25~+70)??????? Humidity:(20~90)%Storage ConditionTemperature: (-40~+85)??Protection LevelIP55: When waterproof rubber seal installed between the? controller and panel fascia.IP42: When waterproof rubber seal is not installed between the controller and panel fascia.Insulating IntensityObject: input/output/powerQuote standard: IEC688-1992Test way: AC1.5kV/1min leakage current:3mA
Reviews
There are no reviews yet.